Knowledge base · Sizing and generation

What does kWp mean on a solar quote?

By the Solar Panel Setup Guide teamChecked

kWp means kilowatt peak, the combined rated power of the panels under standard test conditions. A system of twelve 450 W panels is 5.4 kWp. It tells you the size of the system, not how much electricity it will make in a year.

The detail

To turn kWp into annual kWh, you need a yield figure for your location and roof. MCS's installation standard, MIS 3002, uses the formula: annual AC output (kWh) = kWp × Kk × SF. In that formula:

  • Kk is a factor from tables by postcode zone, roof pitch and orientation. MIS 3002 says its data is drawn from PVGIS and multiplied by 0.8.
  • SF is the shade factor, which is 1.00 for a clear horizon and lower when there is shading.

The EU Joint Research Centre's PVGIS tool gives about 1,019 kWh per kWp a year for a south-facing roof in London at a 35° tilt with 14% losses (our query, 15 November 2026). Because MCS multiplies PVGIS data by 0.8, an MCS estimate for the same roof will be lower.

The Energy Saving Trust says a typical domestic system is around 4.5 kWp. Three related units are worth knowing:

  • kW: power at a moment in time.
  • kWh: energy over time, the unit on your bill.
  • kWp: the panels' rated peak power.

Official source

MCS, MIS 3002 solar PV standard.

Sources

Opened and checked on 15 November 2026.

  1. https://mcscertified.com/wp-content/uploads/2026/03/MIS-3002_Solar-PV-Systems-V6.0-Final.pdf
  2. https://energysavingtrust.org.uk/advice/solar-panels/
  3. https://joint-research-centre.ec.europa.eu/photovoltaic-geographical-information-system-pvgis_en