Knowledge base · Panels, inverters and batteries
Can I add a battery to my solar panels later?
Yes. Most existing systems can take a battery later, usually an AC-coupled one with its own inverter. HMRC's VAT Notice 708/6 says retrofitting a battery to a microgeneration system in a home qualifies for the zero rate until 31 March 2027.
The detail
There are two ways to add a battery:
- AC-coupled battery: this connects on the AC side, alongside your existing solar inverter, so you do not need to replace that inverter. The Enphase IQ Battery 5P, for example, has built-in microinverters.
- Hybrid inverter: this replaces your solar inverter with one that also manages a DC battery. It is worth considering if your current inverter is near the end of its life.
Before you buy, check a few things:
- Size: the Energy Saving Trust says a typical home battery might be 10 kWh, and that a 5 kWh system costs around £4,600, with a range of £1,500 to £10,000 (checked 15 November 2026).
- DNO: a battery inverter adds to your generation capacity, which can move you from G98 to G99. Electricity North West puts the G98 limit at 3.68 kW single phase.
- VAT: see VAT Notice 708/6. This is general information, not financial or tax advice. Rules change, so check GOV.UK or speak to a qualified adviser.
- Warranty: confirm that adding a battery does not affect your existing inverter or system warranty.
Read is a solar battery worth it for a way to estimate the value from your own usage.
Official source
HMRC, VAT Notice 708/6.
Sources
Opened and checked on 15 November 2026.
- https://www.gov.uk/guidance/vat-on-energy-saving-materials-and-heating-equipment-notice-7086
- https://energysavingtrust.org.uk/advice/solar-panel-battery-storage/
- https://enphase.com/en-gb/store/storage/iq-battery-5p-flexphase
- https://www.enwl.co.uk/get-connected/apply-for-a-new-connection/generation-and-storage/micro-generation-and-storage-connections/